Maşină de tencuit Małek Agregaty M-1 MAX 230V nou
≈ 24.160 RON
Węgrzce
Dacă ați decis achiziționarea echipamentului la un preț mic, trebuie să fiți sigur că persoana cu care comunicați este un vânzător real. Aflați toate informațiile disponibile cu privire la proprietarul echipamentului. O metodă de înșelăciune este aceea de a se prezenta ca o societate existentă în mod real. În caz de îndoială, vă rugăm să luați legătura cu noi prin formularul de feedback, pentru alte controale.
Înainte de a decide o achiziție, examinați cu atenție diferite oferte de vânzare pentru a cunoaște costul mediu al modelului ales. Dacă prețul din oferta care vă place este mult mai mic față de alte oferte asemănătoare, gândiți-vă bine. O diferență de preț importantă poate indica defecte ascunse sau o tentativă a vânzătorului de a comite o înșelăciune.
Nu cumpărați produse care au prețuri mult diferite față de prețul mediu al altor produse asemănătoare
Nu dați acordul la plata unor cauțiuni suspecte sau plăți anticipate ale mărfurilor. În caz de îndoieli, clarificați amănuntele, solicitați mai multe fotografii și documente privind mașina, verificați autenticitatea documentelor, puneți întrebări.
Cel mai răspândit tip de înșelăciune. Vânzătorii necinstiți pot cere o anumită sumă din avans, pentru ”rezervarea” dreptului de achiziționare a mijlocului. În acest mod ei strâng o mare sumă de bani, după care dispar, fără a putea fi contactați.
- Transferul plății anticipate pe card
- Nu efectuați plata anticipată fără semnarea documentelor care să ateste procesul de transfer de bani, dacă în timpul tratativei vânzătorul are îndoieli.
- Transfer în contul ”curatorului”
- O astfel de solicitare trebuie să vă alarmeze, foarte probabil comunicați cu o persoană care urmărește să vă înșele.
- Transferul în contul societății cu un nume asemănător
- Atenție, persoanele rău intenționate se pot ascunde în spatele unor societăți renumite, aducând mici modificări numelui societății. Nu efectuați transfer de bani dacă numele societății este dubios.
- Înlocuirea propriilor date în factura societății reale
- Înainte de efectua transferul de bani, vă rugăm să verificați corectitudinea datelor bancare și dacă acestea aparțin societății indicate.
Contactează vânzătorul
+48 883 08...
Arată
+48 883 088 443
+48 603 08...
Arată
+48 603 088 447
+48 502 40...
Arată
+48 502 402 937
Polonia 
Polonia, Bytonia
Polonia, Bytonia
Polonia, Przemęczanki
Polonia, Przemęczanki
Polonia, Przemęczanki
Polonia, Przemęczanki
Polonia, Węgrzce
Polonia, Węgrzce
Polonia, Węgrzce
Polonia, Węgrzce
Polonia, Węgrzce
Polonia, Węgrzce
Polonia, Węgrzce
Polonia, Belchatów
Polonia, Radziemice
Polonia, Radziemice
Polonia, Radziemice
Polonia, Radziemice
Polonia, Radziemice
Polonia, Radziemice
arată contacte
The M-1 MAX 230V plastering and filling unit is a top-class device that meets strict standards and has a European Certificate. The machine will meet the expectations of even the most demanding customers operating in the construction industry. Reliability and refinement in every detail are the characteristics of the plastering unit.
If you are looking for a machine that will serve you for years, choose our offer! We are a Polish manufacturer, making machines we rely on the experience gained, both professional and technical. Our equipment is a response to the needs of the constantly developing construction industry. Without appropriate equipment, it is impossible to provide services at a high level, let alone compete with the competition. The M-1 MAX 230V plastering and filling aggregate is a must have in your company. You can read about the specifics of the product, purpose and benefits below.
The M-1 MAX 230V plastering and filling unit is designed for mechanical feeding of mortars with a grain size of up to 3 mm, adapted for mechanical feeding according to the recommendations of manufacturers such as:
gypsum plaster,
gypsum-lime plaster,
cement,
lime plaster,
lime-cement plaster,
mortar,
damping plaster,
joint mortar,
reinforcement and adhesive mortar,
machine spouts
glues
limestone coatings spraying with a compressor
machine anhydrite screeds
facade plasters
decorative plasters
fire-retardant plasters
bituminous masses
one-component polyurethane masses
ready-made coats, leveling compounds - spraying without a compressor - airless
coats, loose fillers - spray with a compressor
and other
The aggregate tank can be filled with either loose or liquid bagged material.
Plaster and putty aggregate M-1 MAX 230V technical specification:
gear motor feed pump NORD 6.05kW S3-60% 350 rpm
water pump PKM60 230 - 400V 350 W
pump unit D6–3 stator + rotor
Oil-free piston air compressor 230 V, 5.5 bar, 230 l / min
cleaning unit - shaft and cleaner
socket wrench for screwing in the rotor
working hose cleaning ball
water meter 150 - 1500 l / h
working hose DN 25 10 m with camlock couplings
3/4 "water hose reinforced 25 m. Geka clamp and geka with a stub pipe
3/8 ”reinforced air hose 12.5 m fittings 2 x geka with a stub pipe
power cord 3 x 2.5 mm2 10 m PCE 230V plug
75 cm spray lance with a Ø 12 nozzle
gun scraper
a key to unscrew the glass of the water reducer
M-1 MAX mixer
yoke pump DN 25 female cam lock type D with pressure gauge 60 bar
spray gun for producing water mist
Additional equipment:
Automatic spray lance for pneumatic application of mortars with a choice of nozzle:
3/4 "40 bar hose packed 15m
Spray lance automatic machine for pneumatic application of mortars with a choice of nozzles: flat, fi4, fi5, fi6, fi8, fi10
Working hose fi25 40bar 10m forged DN25 cam lock for 1 "hose and stainless female camlock with 1" hose connector
Press for squeezing bags
Control cable depending on the length of the hose: 12.5m, 17m, 22m, 27m
Main components of the generator
The subassemblies that can be removed from the aggregate if necessary (including transport) are:
motor base with 5.5kW drive
charging hopper
pump yoke
stator + rotor
The weight of the aggregate with all main components is 170 kg
What distinguishes the M-1 MAX 230V plastering and filling aggregate from other aggregates? Discover the greatest advantages of the device:
professional quality of finish
Polish product
comfort of work and high efficiency,
low operating costs of the worm pump
separate tank and pump modules
built-in switch of the chiller operation "work with water - without water"
built-in water pump operation switch AUTO / 0 / HAND
control of mixture backflow in the event of mixture blockage
water pump PEDROLLO PKM 60 230 V 350W with the possibility of disassembly
the electric box was assembled on EATON components
the machine has electronic motor protection against overload
smooth speed control of the feeding pump by means of an inverter
height of charge 100 cm
tank capacity 70 kg
delivery pressure max 40 bar
feeding distance max 40m
possibility of connecting the remote control controlling the aggregate
possibility of connecting the gun to the facade plaster and garage systems
ready-to-use putty can be applied without a compressor
applying plasters, finishing coats, bituminous masses with the use of a compressor
built-in switch for the chiller operation with and without water
smooth speed control of the FEEDING PUMP
230 V power supply
We provide a 12-month warranty for the M-1 MAX 230V plastering and filling aggregate!
Shipment of the aggregate in Poland - Free !!!
Why is it worth choosing M-1 MAX 230V plastering aggregates? These are new generation products that meet the highest standards. They provide comfortable and efficient work. By choosing aggregates, you gain the best ally, helping in the implementation of these larger and smaller works. The M-1 MAX 230V plastering unit ensures that nothing unforeseen will surprise you during your work.
Our offer also includes construction parts for aggregates and spare parts.