Mașină de danturat roți dințate Monnier+Zahner KOEPFER MZ 120
Vă interesează anunțul?
1/7
Marca:
Monnier+Zahner
Modelul:
KOEPFER MZ 120
Anul:
2009
Greutate proprie:
2.200 kg
Locul de amplasare:
Germania
Monheim am Rhein6666 km față de tine
Monheim am Rhein6666 km față de tine
Numărul ID din stocul vânzătorului:
1022-2352
Data publicării:
mai mult de o lună
Descriere
Dimensiuni de gabarit:
2,1 m × 1,44 m × 1,7 m
Stare
Stare:
second hand
Servicii suplimentare
Serviciu de transport auto
Important
Această ofertă are caracter orientativ. Informaţiile exacte trebuie solicitate vânzătorului.
Recomandări pentru achiziționare
Contactează vânzătorul
Adresa
Germania, Nordrhein-Westfalen, 40789, Monheim am Rhein, An der Spielbank 4
Ora locală a vânzătorului:
00:32 (CET)
Contactează vânzătorul
Knops Werkzeugmaschinen GmbH & Co. KG
Germania
+49 2173 39...
Arată
+49 2173 3949411
Vindeți utilaje sau vehicule?
Faceți-o cu noi!
Anunțuri asemănătoare
3
Radbreite 250 mm
Modul - max. 1,5 mm
Modul - min. 0,5 mm
Steuerung Fanuc 18i-MB
Gesamtleistungsbedarf kW
Maschinengewicht ca. 2,2 t
Raumbedarf ca. 2100 x 1440 x 1700 m
gear width 250 mm
max. module 1,5 mm
min. module 0,5 mm
Control Fanuc 18i-MB
total power requirement kW
weight of the machine ca. 2,2 t
dimensions of the machine ca. 2100 x 1440 x 1700 m
The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is
characterized by its flexible usability and is used in the small module area.
Just by swiveling the milling spindle from the horizontal to the vertical
position and selecting the corresponding operating mode of the CNC control, the
worm milling machine becomes a gear hobbing machine and vice versa.
CNC control Fanuc 18i-MB (Dialog/ISO)
CNC axes =
X-axis plunge axis
Z-axis longitudinal axis
C-axis workpiece spindle
B-axis tool spindle
V-axis loader axis longitudinal
A-axis swivel axis tool spindle head (included as an option)
Y-axis shift axis (included as an option)
With the following production programs:
Worm milling
Hobbing
Worm hobbing
Bevel gear and spur gear milling
Bevel gear hobbing
Milling cycles =
straight, oblique, crowned toothing,
radial, radial-axial, co- and counter-rotating milling,
roughing, finishing,
worm gears,
straight-toothed bevel gears, face gearing (option only in the partial process)
Worms
[Equipment]
Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!!
Kraft and Bauer fire extinguishing system
Spiral conveyor
Machine documentation
[Technical data]
Workpieces:
Workpiece diameter 2-45 mm
Max. workpiece length 250 mm
Tooth length 150 mm
Max. module in steel=
1 mm (gear hobbing)
1.5 mm (worm milling)
0.5 mm (bevel gear hobbing)
Tools:
Cutter diameter=
16-32 mm (gear hobbing)
40-63 mm (worm milling)
Machine:
Max. setting angle of milling head=
+/- 45 (gear hobbing)
+/- 30 (worm milling)
Shift travel=
34 mm (manual adjustment)
34 mm (CNC axis)
Collet/retraction mandrel W 20
Max. speed of workpiece spindle 770 rpm.
Milling spindle drive 0.55 kW
Max. milling spindle speed 8000 rpm
Axis drives =
X-axis (plunging) / travel 80 mm via CNC
Z-axis (longitudinal feed) / travel 190 mm via CNC
C-axis (workpiece axis) via CNC
Rapid traverse =
X-axis 6000 mm/min.
Z-axis 6000 mm/min.
Hydraulic unit 0.37 kW
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.